The Enforcer
Construction Layers1.) Rigid Frame Construction
2.) Air foil diffusing front grill to maximize air flow
3.) Anti-Microbial Woven Polypropylene Self-Charging Electrostatic Fibers
4.) Polyster Filter Self-Charging
5.) Anti-Microbial Woven Polypropylene Self-Charging Electrostatic Fibers
6.) Expanded Metal Support
Air Commander Electrostatic Air Filters clean the air by using static electricity, a safe, naturally occuring phenomenon. An electrostatic charge is generated by air flowing through a maze of static prone fibers. Airborne particles are attracted and held by the static charge, until released by washing.
Cleaning is Quick and Easy
When cleaned as directed, your Air-Commander filter will give you many years of trouble free use. Failure to properly clean the filter may lessen filter effectiveness, and as with any air filter, it is possible for an excessive dirt buildup to cause air flow resistance sufficient to damage other ventilation components.
-
Cleaning Instructions
-
Simply remove the air filter.
- Flush with water in opposite direction of air flow arrows then rinse other side.
-
Spray with COMBAT
Electrostatic Filter Cleaner to remove stubborn stains.
-
Rinse thoroughly to remove
remaining dirt.
-
Drain excess water and
reinstall.
COMBAT is a special electrostatic filter cleaner.
|
The ENFORCER provides over 94% Arrestance in a premium quality Extruded Aluminum, Gold Anodized frame with a durable and attractive finish. At the heart of this filter are three layers of high arrestance material sandwiched between 2 layers of expanded steel. A special Impregnated black Polypropylene has an EPA registered anti-microbial material to inhibit mold and bacteria growth while the center non-woven layer retains debris in a maze of fibers designed to maximize air flow even when soiled. Rated by independent testing laboratory at over 94% peak arrestance, this filter has 10 times the arrestance of a disposable fiberglass filter. Peak
Arrestance: 94%
Installation Installation for normal household use, is easily performed without professional assistance. Simply remove your old disposable air filter and replace it with your new Air Commander filter. Refer to the filter label reguarding air flow direction when installing. For properly designed air systems, a minimum of at least one square foot of filter surface area is recommended per ton of air conditioning.
|
||||||
|